Adtech ADT-DK300A, Manufacturer'S Manual, Page: 125 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
116
1: negative direction
101
X restrain acc (mm/s^2)
102
Y restrain acc (mm/s^2)
103
Z restrain acc (mm/s^2)
104
4 restrain acc (mm/s^2)
105
X max restrain rate
106
Y max restrain rate
107
Z max restrain rate
108
4 max restrain rate
Range : 1~90000
Unit :
Authority : Super Admin
Default : 90000
Effective time : Instant
Note : 1. Used to configure the restriction acceleration of every axis during
pretreatment processing.
2. No matter which parameter, the lower the setting is, the slower the
processing speed is; vice versa.
3. The setting value should be as high as possible if each axis permits.
4. In comprehensive parameter P1.58 (interpolation speed mode), this
parameter is valid if it is set to 1; the default setting is invalid.
109 X lock brake signal enable
Range : 0~1
Unit : None
Authority : Super Admin
Default : 0
Effective time : Instant
Note : Used for mechanical system control, such as heavy load.
0: Invalid
1: On
110 Y lock brake signal enable