Adtech ADT-DK300A, Manufacturer'S Manual

Page: 144 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
135
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used for input detection port configuration of spindle alarm signal; the
default value is null; used together with parameter 069~072
080
Transduser DetectPort
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used for input detection port configuration of inverter alarm signal; the
default value is null.
081
ExScram2 DetectPort
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used for port configuration of external emergency stop input signal; the
default value is null.
082
Air of ToolCheck OutPort
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used for output port configuration of tool setter blowing; before tool
setting, blow the debris to ensure the tool setting accuracy; the default
value is null.
083 IO Conf in RESET 00~15
Range : 0~65535
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Used to configure the output signal that should be reset. For example, to
reset output port of pin 10# when the system is reset or alarms, press
EOB and set OUT9 in the pop ‐ up dialog box (black dot is selected), press
and hold EOB for three seconds to exit.