Adtech ADT-DK300A, Manufacturer'S Manual

Page: 95 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
86
Parameter type S/N Description Effective mode Default value Page
Port parameter (P6.) 102 Spindle frequency alarm reset port Instant
Port parameter (P6.) 103 Cooler alarm detection port Instant
Port parameter (P6.) 104 External reset input port Instant
Port parameter (P6.) 105 Elastic cutter input port Instant
Port parameter (P6.) 106 Spindle air blow output port Instant 11
Port parameter (P6.) 107 Lubricant level alarm input port Instant
Port parameter (P6.) 108 Spindle brake output port Instant
10.2. General parameter (P1.)
001 X Gear Numerator
002 X Gear Denominator
003 Y Gear Numerator
004 Y Gear Denominator
005 Z Gear Numerator
006 Z Gear Denominator
007 4 Gear Numerator
008 4 Gear Denominator
Range : 1~65535
Unit : None
Authority : Operation admin or higher
Default : 1
Effective
time
: Instant
Note : When screws of different pitches and motors of different step angles or
servo motors of different pulses are matched, or connected through
gears, it allows keeping the program and actual motion distance
consistent through electronic gear ratio setting of the system.