Adtech ADT-DK300A, Manufacturer'S Manual

Page: 110 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
101
094 Enable of G00 Inp mode
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : Used to set whether G00 instruction is moved with G01 mode
If G01 mode is used, the interpolation speed shall follow the setting of
minimum speed;
The acceleration is the interpolation acceleration.
095 Abnormal memory location jump enable
Range : ON~OFF
Unit : None
Authority : Operation admin or higher
Default : ON
Effective time : Instant
Note : Used to restore the breakpoint position when the system is abnormal
during automatic processing. If the system has power failure or exits
abnormally during automatic running, the system will automatically save
current breakpoint location, and will prompt whether run from the
breakpoint after restarted. Press OK and the system will run from the
breakpoint, ignoring the codes before the breakpoint.
096
Pause Z to safe height enable
Range : ON~OFF
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : Used to stop lifting Z axis to set safe height in automatic processing for
safety's sake. When processing is started, it first locates the position
before tool lifting, and then carries out unfinished processing.
097
Pause A to safe height enable
Range : ON~OFF
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : Used to stop lifting A axis to set safe height in automatic processing for
safety's sake. When processing is started, it first locates the position
before tool lifting, and then carries out unfinished processing.