Adtech ADT-DK300A, Manufacturer'S Manual

Page: 87 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
78
Parameter type S/N Description Effective mode Default value Page
Management parameter (P3.) 020 axis control composite
Instant ON
Management parameter (P3.) 021 additional panel enable
Instant OFF
Management parameter (P3.) 022 M macro program selection< >
●
Restart MFUNC(M)
Management parameter (P3.) 023 T macro program selection< >
●
Restart TFUNC(M)
Management parameter (P3.) 024 PLC program selection< >
●
Restart PLC(M)
Management parameter (P3.) 025 Screen saver on Instant 0
Management parameter (P4.) 001 Current tool number Instant
Management parameter (P4.) 002 System cutter Instant
Management parameter (P4.) 003 ATC reference position X (mm) Instant
Management parameter (P4.) 004 ATC reference position Y (mm) Instant
Management parameter (P4.) 005 ATC reference position Z (mm) Instant
Management parameter (P4.) 006 ATC safety height (mm) Instant
Management parameter (P4.) 007 ATC high speed (mm/min) Instant
Management parameter (P4.) 008 ATC low speed (mm/min) Instant
Management parameter (P4.) 009 Quick decline position (mm) Instant
Management parameter (P4.) 010 Tool placing position (mm) Instant
Management parameter (P4.) 011 Tool cutting position (mm) Instant
Management parameter (P4.) 012 Spindle air blow hold time (ms) Instant
Management parameter (P4.) 013 X ‐ safe position after tool change (mm) Instant