Adtech ADT-DK300A, Manufacturer'S Manual

Page: 122 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
113
axis and is positioning but doesn’t process, enable this function to
shorten the motion time.
0: Do not optimize the path
1: Enable the shortest path
Note: If processing is required during the motion, the shortest path may
be not your desired processing track.
074
Max Acc of X(Kpps)
…
…
077
Max Acc of 4(Kpps)
Range : 100~8000
Unit : Kpps (Kilo Pulse Per Second)
Authority : Super Admin
Default : 2000
Effective time : Instant
Note :
Set the maximum acceleration of every axis. This setting will affect the
track speed optimization of pretreatment to every axis. If a high value is
set, the axis response time will be shortened and characteristics of the
motor will be improved according to the machine tool.
This parameter also affects the home function and limit stop function.
Hard limit function: Use hard limit in software scanning mode, in which
the hard limit decelerates and stops according to the maximum
acceleration of this axis. Therefore, if this value is too high, the machine
tool will stop in emergency, and if this value is too low, it will cause too
much overshoot.
Home function: the home acceleration of every axis uses this value.
078
X Servo Home Dir
079
Y Servo Home Dir
080
Z Servo Home Dir
081
4 Servo Home Dir
Range : 0~1
Unit : None
Authority : Super Admin
Default : 0