Adtech ADT-DK300A, Manufacturer'S Manual

Page: 117 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
108
in most cases (at 10mm/min processing speed), it can meet the
requirement on processing safety check.
The hardware response function of hard limit is prior to scanning
response function, i.e. if the hardware response is enabled, it will
quicken the response speed directly. It should be noted that the
hardware response function only can stop pulse in instant mode.
Therefore, the instant stop mode may cause mechanical vibration if the
speed is too high. While software scanning mode uses maximum
acceleration mode and decelerates according to the maximum
acceleration set to every axis by the user (parameter P2.074~077), and
therefore overshot will occur.
029
X Pulse Mode (restart)
030
Y Pulse Mode (restart)
031
Z Pulse Mode (restart)
032
4 Pulse Mode (restart)
Range : 0~1
Unit : None
Authority : Super Admin
Default : 1
Effective time : Restart
Note : Pulse command format setting is to configure the mode of output pulse.
The compatible command format of the motor drive should be known in
advance.
Pulse + pulse
Pulse + direction
033
X Pulse Dir Mode (restart)
034
Y Pulse Dir Mode (restart)
035
Z Pulse Dir Mode (restart)
036
4 Pulse Dir Mode (restart)
Range : 0~1
Unit : None
Authority : Super Admin
Default : 1
Effective time : Restart