Adtech ADT-DK300A, Manufacturer'S Manual

Page: 102 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
93
Negative
Home direction is valid in mechanical home mode, that is, the system
scans the home signal direction of the machine in the home process.
054 Circle InpUnit(mm)
Range : 0~1
Unit : mm
Authority : Operation admin or higher
Default : 0.2
Effective time : Instant
Note : Set the arc interpolation equivalent
If this value is too small, the arc has higher approximation accuracy, but
the computation will be too high, making the pause during processing
obvious and affecting the processing effect.
055
G73(M)LoopObligate(mm)
056
G83(M)LoopObligate(mm)
Range : 0.1~100
Unit : mm
Authority : Operation admin or higher
Default : 2.000
Effective time : Instant
Note : Set the tool retracting amount after Q is fed in G73 and G83 instructions;
this parameter (default: 2mm) is set according to actual chip removal
effect.
057 ArcSpeedUpVal
Range : 0&1
Unit :
Authority : Operation admin or higher
Default : 1
Effective time : Instant
Note : Set arc speed processing mode
As for arc split, 0 is to interpolate through time split arc, and 1 is to
interpolate through step split arc.