Adtech ADT-DK300A, Manufacturer'S Manual

Page: 127 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
118
10.4. Management parameter (P3.)
001
Select SupMode
002
AlterSuperuserPassword
003
Alter User Password
Range : None
Unit : None
Authority : None
Default : None
Effective time : Instant
Note : Set system permissions, including super user, operator and user, of
which super user has the highest permissions, the operator only has part
of the setting permission, and the user can not modify any system
settings. The default option is super user. If you set a super user
password, the system automatically switches to operator permission
after restarted next time. If you set an operator password, the system
switches to user permission after restarted. The default password of
super user and operator is 0.
1. In this menu, press 'EOB' and select permission in the pop ‐ up dialog
box, and then input the user password again to switch to select the
permission;
2. Super user can modify the super user password and operator
password, select the option to modify and press EOB, and input the old
and new password in the pop ‐ up dialog box.
Note: the initial password is 0.
004
Initialize
005
Initialize IO Config
006
all para reset< >
●
Range : None
Unit : None
Authority : Super user
Default : None
Effective time : Instant
Note : Initial parameter table only in super user mode. After initialized, the
parameters will be reset to default. Please back up the parameters before
initializing to avoid repeated setting.