4-12
Adaptec Ultra320 SCSI Cards User’s Guide
2
Select a drive and press Enter. Select Yes when the following
message appears:
Are you Sure?
Yes/No
After you select your spare drive, it will appear as a spare in the
Main menu.
Rebuilding Arrays
Note:
Rebuilding applies to Fault Tolerant arrays (RAID 1 and
RAID 10) only.
If an array Build process (or initialization) is interrupted or critical
with one member missing, you must perform a Rebuild to get the
array to Optimal status. For a critical array Rebuild operation, the
optimal drive is the source drive.
Note:
If no spare exists and a hard disk drive fails, you need to
create a spare before you can rebuild an array. See
before continuing your Rebuild.
To rebuild an array for RAID 1 or RAID 10:
1
From the Main menu, select array for Rebuild and press Enter.
2
Press R for Rebuild.
Adaptec SCSISelect(TM) Utility vX.XX
Type
Mirrored (R1)
Hard Drive
Spare
ID
Vendor
Product
Size
00
03
03
03 Hard Drive Quantum
Adaptec
Quantum
Quantum
HostRAID-A
XP3227W
XP3227W
XP3227W 2GB
2GB
2GB
2GB
Optimal
Free
Optimal
Free
C
reate,
S
pare,
D
elete,
R
ebuild,
V
erify,
B
ootable
39320A at slot 03, 00:0F:00
V
<Arrow> move cursor, <Enter> accept option, <Esc> exit
Status
U320 UG.book Page 12 Tuesday, September 23, 2003 1:47 PM
