D-3
Creating Driver Floppy Disks
Running Windows
To create the driver disk for all operating systems:
1
Insert the Adaptec Installation CD into your CD-ROM drive
and select Adaptec Utilities from the Main menu.
2
From the Adaptec Utilities menu, select Create Driver Disk.
3
Select the appropriate operating system and press Enter.
4
Select the appropriate driver disk option and press Enter.
5
When prompted, insert a blank floppy disk into your A: drive
and follow the on-screen instructions.
Note:
If you are creating a driver disk for a non-Windows
operating system, you must insert a formatted floppy disk
into your
A
drive.
Running UnixWare or Open Unix
To create the driver disk for UnixWare or Open Unix:
1
Open a UNIX terminal.
2
At the root prompt, type:
sdiconfig -l
3
Locate the device node for your CD-ROM drive, for example,
c1b0t1l0
. Mount the CD by typing:
mount -F cdfs -r /dev/cdrom/c1b0t1l0 /mnt
where
c1b0t1l0
is the device node
.
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM
