F-5
Migrating from HostRAID to Adaptec Ultra320 SCSI
4
When the driver is copied on the hard disk drive, click Finish.
5
You will be prompted to restart the computer. Select Yes.
Note:
To migrate the nonboot channel from HostRAID to
SCSI, follow the instructions for migrating from a boot
channel for your other channel.
Migrating With Windows XP
Installing the Adaptec Ultra320 SCSI Driver
To migrate the boot channel on HostRAID to Adaptec Ultra320
SCSI with a Windows XP operating system, follow these steps:
1
Start Windows XP.
2
Go to the Device Manager by right-clicking on My Computer,
then click on Properties=>Hardware=>Device Manager.
3
At the Device Manager, click the + sign next to the SCSI and
RAID controllers entry to expand it.
4
There will be two entries representing the dual channels.
Right-click on the channel that you are booting from, then select
Update Driver
.
Note:
If you are not sure which channel your boot drive is
connected to, change the view of the Device Manager to
View Devices by Connection, and find out which drives
are connecting to which channels.
5
Select Install from a list or specific location (advanced), then
click Next.
6
Select Dont’ search, I will choose the driver to install, then
click Next.
7
Click the Have Disk button.
8
Insert the Adaptec Installation CD into the CD-ROM drive and
click Browse. If the CD automatically opens a welcome screen,
click the Exit button to close it.
U320 UG.book Page 5 Tuesday, September 23, 2003 1:47 PM
