11-8
Adaptec Ultra320 SCSI Cards User’s Guide
Installing the Driver When Installing
OpenServer
To install the ad320 driver at the same time you install OpenServer:
Note:
If your CD-ROM target id (SCSI id) is not 5 (the default),
you will need to note your id for the installation process.
1
Insert the Install CD of the OpenServer package into the boot
CD-ROM drive. Start your computer.
Wait for the
boot:/
prompt to appear.
2
Type
restart link=ad320
then press Enter.
3
When prompted, insert the Ultra320 driver floppy disk for
OpenServer (btld) into the floppy disk drive, then press Enter.
(See
Appendix D, Creating Driver Floppy Disks
for information
on creating driver floppy disks.)
4
Follow the on-screen instructions to continue with installation.
Refer to the OpenServer documentation and on-screen help files
for help in selecting options.
Installing the Driver When OpenServer is
Already Installed
To update or install the ad320 driver on a system where
OpenServer is already installed, follow the instructions in this
section.
1
Mount the floppy disk by typing:
mount /dev/fd0 /mnt
2
Type
btldinstall /mnt
3
When prompted to grant relinking of the kernel, type
y
.
Note:
Remember that OpenServer commands are case sensitive.
Enter the commands exactly as shown.
U320 UG.book Page 8 Tuesday, September 23, 2003 1:47 PM
