![Adaptec 2060100 Manual Download Page 83](http://html1.mh-extra.com/html/adaptec/2060100/2060100_manual_2846396083.webp)
6-3
Installing the HostRAID Driver for Windows NT 4.0
6
The screen displays the adapter drivers supported on the disk.
Select Adaptec HostRAID U320 driver for Windows NT 4.0
and press Enter.
7
If you want to add drivers (other than for HostRAID), press S
and repeat
for each additional adapter and insert the
appropriate disk provided by the hardware manufacturer.
8
Press Enter to continue with the Windows NT 4.0 operating
system setup. Follow the instructions on-screen and in the
Windows NT 4.0 documentation to complete the installation.
Installing the Driver When Windows NT 4.0 is Already Installed
To update or install the
a320raid.sys
driver if Windows NT 4.0 is
already installed:
1
Start Windows NT 4.0.
2
Click the Start button on the Windows NT 4.0 task bar, and then
point to Settings.
3
Click the Control Panel.
4
Double-click the SCSI Adapters icon.
5
Click the Drivers tab, then click the Add button.
6
In the Install Driver window, click the Have Disk button.
7
Insert the Adaptec HostRAID driver for Windows disk in
your floppy disk drive. Enter the following path to the
installation files, then click OK.
a:\nt4
8
In the Install Driver window, Click OK.
9
You must restart your computer for the changes to take effect.
Click Yes to restart your computer.
U320 UG.book Page 3 Tuesday, September 23, 2003 1:47 PM