12-4
Adaptec Ultra320 SCSI Cards User’s Guide
7
Verify if the newly installed Ultra320 driver is on your system
and you have the correct version by typing:
#pkginfo -l ADPU320
(use uppercase ADPU320)
8
Create
/reconfigure
file by typing:
#touch /reconfigure
This will cause the operating system to check for newly
installed devices on the next system boot.
9
Reboot the system by typing:
#shutdown -i0 -g30 -y
The shutdown options are:
■
’-i0’ to bring system to 0 init state.
■
’-g60’ to shut the system down in 60 seconds.
■
’-y’ continue to shutdown withou user intervention.
10
Follow the hardware instructions, turn off the system then
insert the Adaptec Ultra320 controller into one of the PCI slots.
11
If you forgot to create a
/reconfigure
file, on the next boot screen,
enter the boot option as follows:
’b -r’
This boot option will also cause the operating system to check
for newly installed devices.
U320 UG.book Page 4 Tuesday, September 23, 2003 1:47 PM
