F-8
Adaptec Ultra320 SCSI Cards User’s Guide
3
At the Please select the best match... window, keep the default
drive that is highlighted and click Next.
4
You may be prompted with this warning message:
“The software you are installing for this hardware...has not passed
Windows Logo testing to verify its compatibility with Windows XP...”
Ignore the warning and click Continue Anyway.
5
When the driver is copied on the hard disk drive, click Finish.
6
When prompted, click Yes to restart your system.
Note:
To migrate the nonboot channel from HostRAID to
SCSI, follow the instructions for migrating from a boot
channel for your other channel.
Migrating With Windows NT 4.0
Installing the Adaptec Ultra320 SCSI Driver
To migrate the boot channel on HostRAID to SCSI with a
Windows NT 4.0 operating system, follow these steps:
1
Start Windows NT.
2
Click on Start=>Settings=>Control Panel.
3
In the Control Panel, double-click the SCSI Adapters icon and
click on the Drivers tab, then click Add.
4
From the Install Driver window, click Have Disk....
5
Insert the Adaptec Installation CD into the CD-ROM drive. If
the CD automatically opens a welcome screen, click the Exit
button to close it.
6
At the Install from Disk... window, click the Browse button and
path
D:\drivers\windows\winnt40
(where
D
: is the CD-ROM drive
letter). Click OK.
7
From the Install Driver window, select the the appropriate
Adaptec SCSI card from the list and click OK. Restart the
system.
U320 UG.book Page 8 Tuesday, September 23, 2003 1:47 PM
