12-5
Installing the SCSI Driver for Sun Solaris
Removing the Driver From Solaris 9
If you no longer need the driver, you can use the following
procedure to remove it:
1
Make sure your Adaptec Ultra320 controller is not the boot
controller and login as
root
or become super user.
2
Remove the driver by typing:
#pkgrm ADPU320
(use uppercase
ADPU320
)
3
Follow the on-screen instructions for removing the driver.
4
Create
/reconfigure
file by typing:
#touch /reconfigure
This will cause the operating system to check for removed
devices on next system boot.
5
Restart the system by typing:
#shutdown -i0 -g30 -y
The shutdown options are:
■
’-i0’ to bring system to 0 init state.
■
’-g60’ to shut the system down in 60 seconds.
■
’-y’ continue to shutdown without user intervention.
Command Line Options
■
To display system information such as device configurations,
type:
#prtconf
or
#sysdef
■
To displays system diagnostic messages, type:
#dmesg
■
To check driver version, type:
#pkginfo
U320 UG.book Page 5 Tuesday, September 23, 2003 1:47 PM
