3-13
Configuring the Adaptec SCSI Card with SCSISelect
The Configuration menu appears. The Configuration menu
displays the current settings for the SCSI bus interface. The BIOS
Information section at the bottom of the menu displays the
Interrupt (IRQ) Channel and I/O Port Address of the selected
device. This section cannot be modified.
Note:
Text displayed in yellow is for information only and
cannot be selected.
From the Configuration menu, you can access the following
settings:
■
Boot Device Configuration
■
SCSI Device Configuration
■
Advanced Configuration Options
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
SCSI Bus Interface Definitions
SCSI Controller ID ........................................ 7........
SCSI Controller Parity ....................................Enabled
SCSI Controller Termination ...........................Automatic
Additional Options
Boot Device Configuration.............................. Press <Enter>
SCSI Device Configuration .............................Press <Enter>
Advanced Configuration Options .....................Press <Enter>
HostRAID.......................................................Disabled
<F6> - Reset to SCSI Controller Defaults
Adaptec SCSISelect(TM) Utility vX.XX
39320A at slot 6, 00:0E:00
Configuration
BIOS Information
Interrupt (IRQ) Channel.................................10
I/O Port Address............................................FC00h, F000h
U320 UG.book Page 13 Tuesday, September 23, 2003 1:47 PM
