4-11
Using the SCSISelect Utility to Manage Arrays
To add a spare to an existing RAID 10 array, see
Deleting Arrays
To delete an array:
1
From the Main menu, select the array you need to delete by
moving the cursor, then press Enter.
2
Press D. The following message appears:
Delete Array?
3
For RAID 0 and RAID 10, go to Step 4. For RAID 1, select one of
these options, then continue to Step 4:
■
Drive ID 1—
deletes out all data on the drive 1
■
Drive ID 2—
deletes out all data on the drive 2
■
Drive ID 1 & 2—
deletes all data on both drives
■
None—
breaks the array but keeps any existing data on both
drives
4
Select Yes and press Enter. The following message appears:
Are you sure?
5
Select Yes and press Enter. If you select No, you will return to
the Main menu.
Adding a Spare Drive
With RAID 1 or RAID 10 you have the option to create a maximum
of 2 spare drives. You can create a spare before you define your
RAID or you can add a spare later to an existing RAID 1 or
RAID 10 array.
To create a spare prior to defining a RAID, or add to an existing
RAID 1 or RAID 10 array:
1
From the Main menu, press S to add a spare. The following
options appear:
Add Spare
Delete Spare
(only available if a spare already exists)
U320 UG.book Page 11 Tuesday, September 23, 2003 1:47 PM
