AD Boivin 2002 Snow Hawk, Service Manual

Page: 40 / 173

ENGINE REMOVAL 4-3
1
Secondary Clutch
o
Remove the secondary clutch via the one bolt retaining
it. (See the
Secondary Transmission System section
to remove the secondary clutch.)
Carburetor supports
o
Remove the plastic carburetor support by removing the
two mounting screws (No. 1). There is one on each side
of the chassis.
Carburetors
o
Remove the air filters.
o
Insert a screwdriver into the slots on each side of the
chassis to unscrew the hose clamps retaining the
carburetors to the engine intake boots. (See right)
o
Remove the two carburetors from the intake boots.
o
Using clean cloths, plug the engine intake boots and the
carburetor inlet/outlets..
Vacuum hose
o
Disconnect the vacuum hose from the engine.