AD Boivin 2002 Snow Hawk, Service Manual

Page: 162 / 173

WIRE, CABLE AND HOSE ROUTING 17-7
4
2
3
1
3
2
5
Vacuum
Fuel feeder lines:
The fuel pump (No. 1) has two intakes and two outlets.
The two intakes are:
1. The gas tank feed (No. 4)
2. The vacuum (No. 2)
The two outlets are:
1. The carburetor feed on the MAG side (No. 3).
2. The carburetor feed on the PTO side (No. 5).
After leaving the pump, the vacuum hose goes along the base of
the engine under the two carburetor intake adapters.
The hose is installed onto in the vacuum fitting at the base of the
engine.
Make sure the spring clamp is well installed to ensure an airtight
seal.