AD Boivin 2002 Snow Hawk, Service Manual

Page: 158 / 173

WIRE, CABLE AND HOSE ROUTING 17-3
1
B
A
E
C
D
1
2
c
1
C
D
E
The forward wiring section comes up inside the steering column
plate of the vehicle and is anchored with a tie wrap in the nylon
cable fastener (No. 1).
1. Nylon cable fastener
After the nylon cable fastener, the wiring divides into five
segments (A-E).
Secure the accessories wire to the wire for the headlight, using
a tie wrap (No. 1).
Join the wire for the headlight to the accelerator cable, using a
nylon fastener (No. 2).
A- Headlight wire
B- Accessories wire
C- Engine cutoff and emergency stop
D- Stop lamp microswitch
E- Dimmer switch
Bring together the wires of the switch for the lights (E), of the
switch for the stop light (D) of the engine cutoff and emergency
stop (C) and the accelerator cable, and join them using a nylon
fastener (No. 1).
The wires for the engine cutoff and the emergency stop
separate into two segments after the junction of wires in No. 1.
C- Emergency stop
c- Engine cutoff
Place the wires for the emergency stop, the switch for the stop
light, and the switch for the lights under the protective cushion
(see the photograph).
The cab
Nylon fasteners anchor the cab wiring in three places: