AD Boivin 2002 Snow Hawk, Service Manual

Page: 133 / 173

CHASSIS AND STEERING SYSTEM 13-7
51 339.163Al 1 1/2'' shoulder screw socket screw
52 SH 110 1 Kickstand adaptor
53 02.108 1 Kickstand spring
54 404-339AI 1 Button socket cap screw 5/16'' x 3/4'' (L)
55 404-337AI 1 Button socket cap screw 5/16'' x 1/2'' (L)
56 23164F 11 Elastic hex nut M8 (flange head)
57 22214Al 24 Button head M8x20
58 SH 015 4 Bearing housing
59 084.10.30 4 Socket head cap screw M10x30 (GR 10.9)
60 057.8.30 8 Hex head cap screw M8x30
61 21110P 8 M8 split spring lock washer
62 22225Al 2 Button head M10x25
63 368.8 28 Hex elastic nut M8
64 061.6.25 8 Hex head flange bolt M6x25
65 23162F 4 Elastic hex nut M6 (flange head)
66 22216Al 4 Button head M8x30
67 SH 047 2 Belt guard support
68 SH 046 1 Belt guard cover
69 061.6.16 4 Hex head flange bolt M6x16 (GR 10.9)
70 BSS-68-100 2 Pop rivet 3/16''
71 12-164-01 1 Belt holder spare
72 SH 252 1 Jackshaft alignment collar
73 504.108.200 1 Shim
74 061.8.30 9 Hex head flange bolt M8x30
75 SH 055 1 Threaded aluminum drive rod
76 23166 2 Hex elastic nut M10
77 20171P 4 Hex head cap screw M6x75
78 SH 054 4 Rubber steering damper
79 SH 049 4 Plastic half steering bushing
80 SH 056 1 Steering damper support
81 SH 008 1 Handle bar stiffener
82 SH TCC 1 Throttle cable clamp
83 SH 034 1 Chock support
84 336-103 1 Hex flange stove nut 5/16''
85 130-119 2 #10x1''(L) slotted hex wood screw
86 SH 042 1 Belt tensioner block
87 22205Al 2 Button head M6x25
88 SH 058 2 Hand starter wheel
89 6000LL 2 Bearing 6000
90 184-110 2 Retaining ring
91 330-516 1 Hex nut 5/16''
92 SH 057 2 Handle starter wheel spacer
93 EYB5162P 1 Turned eyebolt full thread 5/16''x2',x3.125''
94 18-95267 1 Handle bar
95 SH 016 4 Handle bar clamp
96 SH 13-SA 1 Steering column
97 053.8.45 4 Hex head cap screw M8x45
98 442.12 2 1/2'' split spring lock washer
99 SH 1021L 1 Left peg
100 SH 017 4 Engine support spacer