AD Boivin 2002 Snow Hawk, Service Manual

Page: 161 / 173

WIRE, CABLE AND HOSE ROUTING 17-6
1
1
HOSE ROUTING
u u
WARNING
Always make sure that the conduits are well secured to
the connectors, that they are neither perforated nor
mixed-up, and that they are well positioned, far from any
rotating, moving, heating or vibrating parts. In addition,
check to make sure there are no leaks. Replace them if
necessary.
Brake hose
o
The brake hose is secured to the brake master cylinder.
o
Pass the hose in front of the handlebars and steering
column.
o
The hose then goes down behind the steering column
plate.
o
The brake hose is attached along the plate of the
steering column with two tie wraps (No. 1).
o
The hose then goes outside the chassis through the
hole on the left side, near the brake system.
o
The hose is then secured to the calliper.