AD Boivin 2002 Snow Hawk, Service Manual

Page: 106 / 173

FRONT FORK AND SKI 11 – 14
o
With the fork leg still in a vertical position and fully
compressed, adjust the fluid level.
Recommended level: X = 100 mm (3-5/16 in)
λ
NOTICE:
It may be necessary to add or to take out some fluid to reach the
recommended level.
τ
CAUTION
The fluid level can be modified but must remain between
85 mm and 120 mm.
o
Insert the needle return spring, the needle and the
push rod.
o
Install the spring (F) inside the strut (P).
λ
NOTICE:
When the coils are closer to one another at one end of the
spring, this end must be placed facing the upper part of the fork
leg (i.e. towards the top cap).
o
Install the upper spring retainer (R) and the top cap (B)
of the strut.