Operation
65/ 84
Fresh grease separator plant Lipator-S-RA/Lipator-P-RA
EN
4.2.2 Function of the controls
Element
Function
Explanation
Agitating device
H - 0 - A
Operation of
operating device
Switch position H (does not latch, must be held): Agitating device
is switched on manually. If the agitating device is in operation the
switching knob is illuminated.
Switch position A (latches): The agitating device is switched on
and off automatically according to the default settings in the
PLC. If the agitating device is in operation the switching knob is
illuminated.
Heating rod
H - 0 - A
Heating rod
operation
Switch position H (does not latch, must be held): Heating rod
is switched on manually. If the heating rod is in operation the
switching knob is illuminated.
Switch position A (latches): The heating rod is switched on and
off automatically according to the default settings in the PLC. If
the heating rod is in operation the switching knob is illuminated.
Sludge draw-off ball
valve
H - 0 - A
operation of sludge
draw-off ball valve
Switch position H (does not latch, must be held): Ball valve is
opened manually. If the ball valve is open, the switching knob is
illuminated.
Switch position A (latches): Ball valve is opened or closed
automatically according to the default settings at the timer and
PLC. If the ball valve is open, the switching knob is illuminated.
Grease draw-off ball
valve
H - 0 - A
operation of grease
draw-off ball valve
Switch position H (does not latch, must be held): Ball valve is
opened manually. If the ball valve is open, the switching knob is
illuminated.
Switch position A (latches): Ball valve is opened or closed
automatically according to the default settings at the timer and
PLC. If the ball valve is open, the switching knob is illuminated.
Solenoid valve
H - 0 - A
Operation of
solenoid valve
Switch position H (does not latch, must be held): Solenoid valve
of the filling device is opened manually. If the solenoid valve is
open, the switching knob is illuminated.
Switch position A (latches): The solenoid valve of the filling device
is switched on and off automatically according to the default
settings in the PLC. If the solenoid valve is open, the switching
knob is illuminated.
Reset grease
collecting barrel full Display and
acknowledge grease
collecting barrel full
Illuminated button flashes: grease collecting barrel full
After changing the collecting barrel (level limit switch no longer
wetted) the display is acknowledged by pressing the illuminated
button.
Reset sludge
collecting barrel full Display and
acknowledge sludge
collecting barrel full
Illuminated button flashes: sludge collecting barrel full
After changing the collecting barrel (level limit switch no longer
wetted) the display is acknowledged by pressing the illuminated
button.
Control power
supply
If the main switch is in position "I", the electrical equipment is
connected with all poles to the electrical supply .
