Acer AB460 F1, User Manual

Page: 32 / 618

2 Chassis Enclosure 12
• This product is intended for installation only in a
Restricted Access
Location
(dedicated equipment rooms, service closets and the like).
This is because the AB7000 enclosure does not provide any physical
security measures.
• This product is not suitable for use with visual display work place
devices according to
§2
of the
German Ordinance for Work with
Visual Display Units
.
Warning! Please read the following important Warnings
and Precautions!
Rack Precautions
The following are important precautions concerning rack setup:
•
The enclosure unit is heavy and requires at least two people to lift
it.
• Ensure that the leveling jacks on the bottom of the rack are fully
extended to the floor with the full weight of the rack resting on
them.
• In single rack installation, stabilizers should be attached to the
rack.
• In multiple rack installations the racks frames should be grounded
to the same earth ground as the electrical source for the power
supplies by means of a grounding strap.
Server Precautions
The following are important precautions concerning server setup:
•
Review the electrical and general safety precautions in this front
matter.
• Determine the placement of each component in the rack
before
you install the rails.
• Install the heaviest server components on the bottom of the rack
first, and then work up.
• Use a regulating uninterrupted power supply (UPS) to protect the
server from power surges, voltage spikes and to keep your system
operating in case of a power failure.