Acer AB460 F1, User Manual

Page: 39 / 618

19
Reset Button
The Reset button located on the front of the CMM module is used to
reset the following software settings to their defaults:
6 USB P orts
7 Reset Button
8 Module Release Handle
9 USB 2.0/1.1 Switch (accessed at back of module, see Figure 2-9)
Feature Description
Management
Capabilities Can manage 10 blade units with up to 20
computing nodes, network modules and 4 power
supplies
Ports One Ethernet port, one VGA port and two USB
ports
Basic Functions
Supported Local KVM, remote KVM, remote storage, Serial-
over-LAN (SOL), blade monitoring and control
System Management System management interface provided via
dedicated LAN
Power Consumption Approximately 20W
Operating System Firmware (upgradable)
Software Setting Default
User Name and
Password Reset to root and superuser (case
sensitive)
IP Address Reset to 192.168.100.100
Acer Address Reset to 0.0.0.0
Item# Description