Appendix A: Troubleshooting
584
System cache error - Cache
disabled
RAM cache failed and BIOS disabled the cache.
On older boards, check the cache jumpers. You
may have to replace the cache. See your dealer.
A disabled cache slows system performance
considerably.
CPU ID:
CPU socket number for Multi-Processor error.
EISA CMOS not writeable
ServerBIOS2 test error: Cannot write to EISA
CMOS.
DMA Test Failed
ServerBIOS2 test error: Cannot write to
extended
DMA
(Direct Memory Access)
registers.
Software NMI Failed
ServerBIOS2 test error: Cannot generate
software NMI (Non-Maskable Interrupt).
Fail-Safe Timer NMI Failed
ServerBIOS2 test error: Fail-Safe Timer takes too
long.
device Address Conflict
Address conflict for specified
device
.
Allocation Error for:
device
Run ISA or EISA Configuration Utility to resolve
resource conflict for the specified
device
.
CD ROM Drive
CD ROM Drive identified.
Entering SETUP...
Starting Setup program
Failing Bits: nnnn
The hex number
nnnn
is a map of the bits at the
RAM address which failed the memory test. Each
1 (one) in the map indicates a failed bit. See
errors 230, 231, or 232 above for offset address
of the failure in System, Extended, or Shadow
memory.
Fixed Disk n
Fixed disk
n
(0-3) identified.
Invalid System
Configuration Data
Problem with NVRAM (CMOS) data.
I/O device IRQ conflict
I/O device IRQ conflict error.
BIOS Message
Description
Summary of Contents for AB460 F1
