453
IGMP Snooping Timer
Clicking the T
IMER
tab brings up the IGMP S
NOOPING
T
IMER
C
ONFIGURATION
page, which configures IGMP snooping timers. The
parameters for this page are shown in the following table.
Parameter
Description
Router Port
PurgeInterval (Secs)
This parameter specifies the interval for which the
learnt router port will be purged. The default value is
125-seconds
.
Group-Member
Port Purge Interval
(Secs)
This parameter specifies the interval after which a port
gets deleted, if IGMP reports are not received on a
port. The default value is
260-seconds
.
Report Forward
Interval (Secs)
This parameter specifies the interval within which the
next report messages for the same multicast group will
not be forwarded. The default value is
5-seconds
.
Group Query
Interval (Secs)
This parameter specifies the interval within which the
switch sends a group specific query on a port when an
IGMPv2 leave message is received. The default value is
2-seconds
.
Summary of Contents for AB460 F1
