![background image](http://html.mh-extra.com/html/access/7000/7000_installation-manual_455258050.webp)
Fig. 24 Height of the lifting yoke
Do not tighten the fixations, the position shall be possible to adjust later.
5.4 CONNECTING CABLES
WARNING
Make sure that the main switch and all fuses are switched off when working with any
electrical components.
Note:
To run the lift without having the door closed, the door circuit line and the door
blocking circuit line (together the safety circuit line) must be overridden with a
bridge.
• Make sure that the codes on the connectors matches the codes on the U1 board. See Fig. 25
Fig. 25 U1 circuit board
CAUTION
Before starting the lift, Mount the Final limit switch.
The Final limit switch is mounted to a metal bracket on the bottom of the top beam. The switch arm
should be placed as shown in the picture.
Pull the switch down before the screws are tightened
. The
46
7000 100 en-GB AD
Summary of Contents for 7000
