1
INTRODUCTION
This platform lift is named Aritco 7000; however the name A1 or 7000-series might be used in some
quality related documents but is the same product. This manual contains instructions and information
for the installation of a platform lift Aritco 7000.
The document number is built-up as follows:
Document number
7000 100 en AD
Product type
7000
100 en AD
Document type
7000
100
en AD
Language key
7000 100
en
AD
Revision
7000 100 en
AD
The document types available are:
• 100 - Installation Instructions
• 200 - Users Manual
• 300 - Maintenance Manual
• 400 - Control System Document
• 500 - Safety Check List
• 600 - Spare Parts List
This Installation Manual is intended for the use and reference by installers of this product who have re-
ceived appropriate product training approved by Aritco Lift AB. Installers will be named competent
person.
The extent of the information is govern by the assumption that the personnel involved have received
appropriate training.
It also contains generic Health & Safety information and a method statement, however in most cases
site specific documents will be required reflecting the particular circumstances pervading at a site. The
extent of the information is govern by the assumption that the personnel involved have received appro-
priate training.
1.1 CONFIGURATION
The Aritco 7000 platform lift has the following basic configuration:
• Platforms in 8 different sizes.
• Doors with passage on view A, B and C, max 2 doors / floor
7000 100 en-GB AD
1
Summary of Contents for 7000
