1
INTRODUCTION
This document describes the installation of the Totalflow Cold Weather Enclosure and
equipment designed for use with the NGC8200 Chromatograph. These instructions are
listed in the suggested installation order. Depending upon how your system was
configured, some of these instructions may not apply to your installation. When optional
equipment installation has been completed, refer to the “
NGC8200 User’s Manual
” for
additional instructions software startup and operation.
As with all installation and maintenance on the NGC8200 Chromatograph, please
observe local codes for hazardous areas as required.
C
Figure 1 Typical Cold Weather Enclosure with Electric Heater
Locating Area for Installation
The NGC should be located as close as possible to the Sample Probe installation
point. This prevents the need for high gas flow rates through sample lines to assure
analysis accuracy of current sample.
If there is more than one stream being analyzed, locate the NGC in a central location
to all Sample Probe points.
NOTE:
Be certain the installation site is clean and free of foreign debris that could
affect NGC operation.
I.
Unpacking & Inspection
1) Shipping Carton
Ensure that there is no external damage to the shipping container. If there is
significant visible external damage contact your receiving group and report the
damage to the trucking company for a Freight Damage Claim.
