11
B. Instructions
1)
Place Mounting Plate (see Figure 14) inside of the Cold Weather Enclosure,
oriented horizontally so that each Bolt hole is aligned with the Mounting
Tracks (see Figure 15).
2)
Move Channel Spring Nuts into position underneath slotted mounting holes.
Figure 14 NGC Mounting Plate
MOUNTING TRACKS
5/16"-18 CHANNEL SPRING NUTS
Figure 15 Cold Weather Enclosure Interior
3)
Place split washer, then flat washer on one of the 5/16” screws and insert
through one of the 4 holes on the mounting base, into the corresponding
Channel Nut. Do not tighten until unit is in final position.
4)
Repeat for other 3 screws/channel Nuts.
5)
Screw 2” pipe into flange on mounting plate until “wrench tight”.
