ABB RDNA-01, User Manual

Page: 77 / 88

Diagnostics
77
Diagnostics
RDNA-01 status codes
The status of the DeviceNet module is indicated by a ‘fieldbus
status’ parameter in the drive application program (refer to the
drive documentation).
IDLE
The drive could not initiate communication with the DeviceNet
Module.
EXECUT. INIT
The module is initialising and performing self-test.
TIME-OUT
The DeviceNet Module has stopped communicating with the drive.
CONFIG ERROR
The DeviceNet Module has not accepted the configuration file
downloaded from the drive. Check compatibility of module and
drive file version number.
OFF-LINE
The module has completed its power-up sequence, and is waiting
for a DeviceNet Scanner or the Manager software to establish a
connection.
ON-LINE
The DeviceNet module is connected and communicating with a
DeviceNet Scanner or Manager software.
RESET
The drive has initiated a reset command to the module.