ABB OmniCore C30 Product Manual Download Page 164

Page: 164 / 606

Note/Illustration

Action

Screws: Torx pan head screw M4x8 (4 pcs)

xx1800001188

Cable clip

Secure the optional power supply with
the screws.

Connect:

•

A1.X7 - T5.X1

Note

The connector on the AC_in cable
(

3HAC061099-001

) is fastened to the

cable clip in the illustration when the
power supply optional is not selected.

Refitting the axis computer to the frame

Note/Illustration

Action

DANGER

Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see

Electrical safety on

page 31

Location of wrist strap button:

xx1800000683

ELECTROSTATIC DISCHARGE
(ESD)

The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section

The unit is sensitive to

ESD on page 47

Reconnect and secure the screw:

•

K6.X4, K6.X5 - SMB.

Continues on next page

164

Product manual - OmniCore C30

3HAC060860-001 Revision: P

3 Installation and commissioning

3.7.4 Installing the power supply optional device and the harness 24 V extension

Continued

Summary of Contents for OmniCore C30






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OmniCore C30

Reviews:

Related manuals for OmniCore C30

Brands by name

Popular brands

ABB OmniCore C30, Product Manual

Search results

Summary of Contents for OmniCore C30

Reviews:

Related manuals for OmniCore C30

Brands by name

Popular brands