ABB OmniCore C30, Product Manual

Page: 201 / 606

4 Maintenance
4.1 Maintenance schedule, OmniCore
General
The controller must be maintained at regular intervals to ensure its function. The
activities and intervals are described in this section.
Activities and intervals
Detailed in section: Interval Maintenance
activity Equipment
Inspecting the OmniCore C30 con-
troller on page 203 12 months
i
Inspection Complete controller
Replacement of air filter element
for the controller with vertical
mounting kit on page 208 24 months * Replacement Air filter element
Inspecting the OmniCore C30 con-
troller on page 203 6 months
i
Inspection System fans
Cleaning of the controller cabinet
on page 205 Cleaning Control cabinet
Cleaning the FlexPendant on
page 206 When needed Cleaning FlexPendant
Function test of emergency stop on
page 212 12 months Function test Emergency stop
(FlexPendant)
Function test of manual, auto, and
manual full speed mode with Flex-
Pendant on page 213 12 months Function test Manual, auto and
manual full speed
mode with FlexPend-
ant
Function test of three-position en-
abling device on page 214 12 months Function test Enable device
Function test of safety switches on
page 215 12 months Function test Safety switches
Function test of Automatic Stop on
page 216 12 months Function test Auto stop (tested if
used)
Function test of General Stop on
page 217 12 months Function test General stop (tested
if used)
Function test of external emergency
stop on page 218 12 months Function test External emergency
stop (tested if used)
Function test of ESTOP_STATUS
output on page 219 12 months Function test ESTOP_STATUS
output (tested if
used)
Function test of reduced speed
control on page 220
.
During commis-
sioning Function test Reduced speed
control
i
The interval depends on the working environment of the equipment: a cleaner environment may
extend the maintenance interval and vice versa.
Continues on next page
Product manual - OmniCore C30 201
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
4 Maintenance
4.1 Maintenance schedule, OmniCore