ABB i-bus
®
KNX
Commissioning
© 2008 ABB STOTZ-KONTAKT GmbH
70
The following parameter appears with the selection
Staircase lighting
:
Staircase lighting time in s
[1…65,535]
Options: 1…30…65,535
The staircase light defines how long the contact is closed – provided
that the contact is programmed as a normally open contact – and how
long the light remains on after an ON command. The input is made in
seconds.
Extending staircase lighting by multiple
operation (“pumping up”)
Options:
no (not retriggerable)
yes
(retriggerable)
up to max. 2x staircase lighting time
up to max. 3x staircase lighting time
up to max. 4x staircase lighting time
up to max. 5x staircase lighting time
If a further ON telegram is received during the staircase lighting time
sequence, the remaining staircase lighting time can be extended by a
further period. This is possible by repeated operation of the push
button (“pumping up“) until the maximum programmed number of
retriggering operations is reached. The maximum time can be set to
1, 2, 3, 4 or 5-fold time of the staircase lighting time.
The staircase lighting time is extended by “pumping up” to the
maximum time. If some of the time has already timed out, the
staircase lighting time can again be extended to the maximum time
by “pumping up”.
The parameterised maximum time may not however be exceeded.
•
no:
The receipt of an ON telegram is ignored.
The staircase lighting time continues without modification to
completion.
•
yes (retriggerable):
The staircase light time is reset each time by
a renewed ON telegram and starts to count again each time.
This process can be repeated as often as desired using this
selection.
•
Up to max. 2/3/4/5 x staircase lighting time:
The staircase lighting
time is extended by the 2/3/4/5-fold staircase lighting time with a
renewed ON telegram.
Staircase lighting can be switched
Options:
ON with 1 and OFF with 0
ON with 1 no action with 0
ON with 0 or 1, switch OFF not possible
This parameter defines the telegram value used for switching the
staircase lighting on and off prematurely.
•
ON with 0 or 1, switch OFF not possible:
The
Staircase lighting
function is switched on independently of the value of the incoming
telegram. Premature switch off is not possible.
