ABB FSCA-01, User Manual

Page: 43 / 90

Start-up 43
FSCA-01 configuration parameters – group C (group 3)
Note: The actual parameter group number depends on the drive
type. Group C (group 3) corresponds to:
•
parameter group 54 in ACS355
•
parameter group 52 in ACSM1, ACS530, ACS850 and
ACQ810
•
parameter group 52 in ACS880 if the adapter is installed as
fieldbus adapter A or group 55 if the adapter is installed as
fieldbus adapter B.
No.
1)
Name/Value Description Default
01 FBA data in1
(drive to master) Selects the drive parameter address from
which the data is read to the DATA IN 1
register (from the server to the master). The
Modbus register address maps are explained
in chapter
Communication protocol .
The content is defined by a decimal number in
the range of 0 to 9999 as follows:
0 = None
0 = None Not used
101…9999 Parameter index with format xxyy , where
• xx is the parameter group number (1…99)
• yy is the parameter number index within
that group (01…99).
Other Path to parameter area selection.
02…
12 FBA data in2…
FBA data in12 See parameter 01 FBA data in1 . 0 = None
1)
The number of parameters in this group may vary by drive type and drive firmware.
0 Not used
1…99 Virtual address area of drive control.
Not used with Modbus/RTU.
101…
9999 Parameter area of the drive