ABB FSCA-01, User Manual

Page: 42 / 90

42 Start-up
FSCA-01 configuration parameters – group B (group 2)
Note: The actual parameter group number depends on the drive
type. Group B (group 2) corresponds to:
•
parameter group 55 in ACS355
•
parameter group 53 in ACSM1, ACS530, ACS850 and
ACQ810
•
parameter group 53 in ACS880 if the adapter is installed as
fieldbus adapter A or group 56 if the adapter is installed as
fieldbus adapter B
No.
1)
Name/Value Description Default
01 FBA data out1
(master to drive) Selects the drive parameter address into
which the value of the DATA OUT 1 register is
written (from the master to the server). The
Modbus register address maps are explained
in chapter
Communication protocol .
The content is defined by a decimal number in
the range of 0 to 9999 as follows:
0 = None
0 = None Not used
101…9999 Parameter index with format xxyy , where
• xx is the parameter group number ( 1 … 99 )
• yy is the parameter number index within
that group ( 01 … 99 ).
Other Path to parameter area selection.
02…
12 FBA data out2…
FBA data out12 See parameter 01 FBA data out1 . 0 = None
1)
The number of parameters in this group may vary by drive type and drive firmware.
0 Not used
1…99 Virtual address area of drive control.
Not used with Modbus/RTU.
101…
9999 Parameter area of the drive