![background image](http://html.mh-extra.com/html/abb/acs880-11/acs880-11_hardware-manual_2643132.webp)
Description
Term
Connection
XD24
Auxiliary voltage output, digital interlock
4)
Run enable
4)
DIIL
DIIL
1
+24VD
DICOM
+24VD
DIOGND
2
3
4
5
+24 V DC 200 mA
+24VD
Digital input ground
DICOM
+24 V DC 200 mA
5)
+24VD
Digital input/output ground
DIOGND
XDIO
Digital input/outputs
Output: Ready run
DIO1
1
DIO1
2
DIO2
Output: Running
DIO2
Ground selection
6)
J6
XDI
Digital inputs
Stop (0) / Start (1)
DI1
1
DI1
DI2
DI3
DI4
DI5
DI6
2
3
4
5
6
+24VD
Forward (0) / Reverse (1)
DI2
Reset
DI3
Acc/Dec time select
7)
DI4
Constant speed 1 (1 = On)
8)
DI5
By default, not in use.
DI6
Safe torque off circuits must be closed for the drive to start.
9)
XSTO
Safety options connection
X12
Control panel connection
X13
Memory unit connection
X205
1) Current [0(4)…20 mA,
R
in = 100 ohm] or voltage [0(2)…10 V,
R
in > 200 kohm] input selected by switch AI1.
Change of setting requires reboot of control unit.
2) Current [0(4)…20 mA,
R
in = 100 ohm] or voltage [0(2)…10 V,
R
in > 200 kohm] input selected by switch AI2.
Change of setting requires reboot of control unit.
3) See section
4) See section
Total load capacity of these outputs is 4.8 W (200 mA at 24 V) minus the power taken by DIO1 and DIO2.
6) Determines whether DICOM is separated from DIOGND (ie. common reference for digital inputs floats; in
practice, selects whether the digital inputs are used in current sinking or sourcing mode). See also
ground isolation diagram (page 138)
. DICOM=DIOGND ON: DICOM connected to DIOGND. OFF: DICOM
and DIOGND separate.
7) 0 = Acceleration/deceleration ramps defined by parameters
23.12
/
23.13
in use. 1 = Acceleration/deceleration
ramps defined by parameters
23.14
/
23.15
in use.
8) Constant speed 1 is defined by parameter
22.26
.
9) See chapter
The Safe torque off function (page 209)
.
The wire size accepted by all screw terminals (for both stranded and solid wire) is 0.5
… 2.5 mm
2
(24…12 AWG). The torque is 0.5 N·m (5 lbf·in).
132 Control units of the drive
Summary of Contents for ACS880-11
