![background image](http://html1.mh-extra.com/html/abb/acs850-04-series/acs850-04-series_firmware-manual_3365228072.webp)
72 Program features
Settings
Parameter group
(page
).
Programmable analog outputs
The drive has two current analog outputs. Each output can be filtered, inverted and
scaled. The number of analog outputs can be increased by using FIO-xx I/O
extensions.
Settings
Parameter group
(page
).
Programmable digital inputs and outputs
The drive has six digital inputs, a digital start interlock input, and two digital input/
outputs.
One digital input (DI6) doubles as a PTC thermistor input. See section
.
One of the digital input/outputs can be used as a frequency input, one as a frequency
output.
The number of digital inputs/outputs can be increased by using FIO-xx I/O
extensions.
Settings
Parameter group
(page
Programmable relay outputs
The drive has three relay outputs. The signal to be indicated by the outputs can be
selected by parameters.
Relay outputs can be added by using FIO-xx I/O extensions.
Settings
Parameter group
(page
Programmable protection functions
)
The parameter selects how the drive reacts to loss of start interlock signal (DIIL).
Summary of Contents for ACS850-04 series
