ABB ACS850-04 series, Firmware Manual

Page: 154 / 296

154 Parameters
Const Bit pointer setting (see Terms and abbreviations on page 93 ). -
Pointer
21.05 Speed share Defines the scaling factor for speed reference 1/2 (speed
reference 1 or 2 is multiplied by the defined value). Speed
reference 1 or 2 is selected by parameter
21.04 Speed ref1/2
sel .
-8.000 …8.000 Speed reference scaling factor. 1000 = 1
21.07 Speed ref jog1 Defines the speed reference for jogging function 1. For more
information on jogging, see page
63 .
-30000 … 30000
rpm Speed reference for jogging function 1. 1 = 1 rpm
21.08 Speed ref jog2 Defines the speed reference for jogging function 2. For more
information on jogging, see page
63 .
-30000 … 30000
rpm Speed reference for jogging function 2. 1 = 1 rpm
21.09 SpeedRef min abs Defines the absolute minimum limit for the speed reference.
0 … 30000 rpm Absolute minimum limit for speed reference. 1 = 1 rpm
21.10 Mot pot func Selects whether the value of the motor potentiometer is
retained upon drive power-off.
Reset Drive power-off resets the value of the motor potentiometer. 0
Store The value of the motor potentiometer is retained over drive
power-off. 1
21.11 Mot pot up Selects the source of motor potentiometer up signal.
DI4 Digital input DI4 (as indicated by 02.01 DI status , bit 3). 1073938945
DI5 Digital input DI5 (as indicated by 02.01 DI status , bit 4). 1074004481
DI6 Digital input DI6 (as indicated by 02.01 DI status , bit 5). 1074070017
Const Bit pointer setting (see Terms and abbreviations on page 93 ). -
Pointer
No. Name/Value Description FbEq
20.01
Maximum speed
21.09
SpeedRef min abs
-( 21.09
SpeedRef min abs )
20.02
Minimum speed
Speed reference
Limited speed reference