ABB ACS850-04 series, Firmware Manual

Page: 30 / 296

30 The ACS850 control panel
„
Assistants
Assistants are routines that guide you through the essential parameter settings
related to a specific task, for example application macro selection, entering the motor
data, or reference selection.
In the Assistants mode, you can:
• use assistants to guide you through the specification of a set of basic parameters
• start, stop, change the direction and switch between local and remote control.
How to use an assistant
The table below shows how assistants are invoked. The Motor Set-up Assistant is
used here as an example.
Step Action Display
1. Go to the Main menu by pressing if you are in the
Output mode.
Otherwise press
repeatedly until you get to the
Main menu.
2. Go to the Assistants mode by selecting ASSISTANTS on
the menu with keys
and , and pressing
.
3. The Motor Set-up assistant under Firmware assistants is
used as an example.
Select Firmware assistants with keys
and ,
and press .
4. Select Motor Set-up with keys and , and
press .
5. Select the appropriate motor type with keys and
.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
Firmware assistants
Application assistant
EXIT SEL 00:00
ASSISTANTS 1 LOC
SEL
Select assistant
Application Macro
Motor Set-up
EXIT OK
00:00
CHOICE
LOC
OK
9904 Motor type
PAR EDIT
AM
EXIT SAVE 00:00
[0]
LOC
9904 Motor type
PAR EDIT
PMSM
EXIT SAVE 00:00
[1]
LOC