ABB ACS850-04 series, Firmware Manual

Page: 138 / 296

138 Parameters
14.62 Freq out max src When 14.10 DIO3 conf is set to Freq output , defines the real
value of the signal (selected by parameter 14.61 Freq out src )
that corresponds to the maximum DIO3 frequency output
value (defined by parameter
14.64 Freq out max sca ).
0 … 32768 Real signal value corresponding to maximum DIO3 output
frequency. 1 = 1
14.63 Freq out min src When 14.10 DIO3 conf is set to Freq output , defines the real
value of the signal (selected by parameter 14.61 Freq out src )
that corresponds to the minimum DIO3 frequency output
value (defined by parameter
14.65 Freq out min sca ).
0 … 32768 Real signal value corresponding to minimum DIO3 output
frequency. 1 = 1
14.64 Freq out max sca When 14.10 DIO3 conf is set to Freq output , defines the
maximum DIO3 output frequency.
3 … 32768 Hz Maximum DIO3 output frequency. 1 = 1 Hz
14.65 Freq out min sca When 14.10 DIO3 conf is set to Freq output , defines the
minimum DIO3 output frequency.
3 … 32768 Hz Minimum DIO3 output frequency. 1 = 1 Hz
14.67 RO6 src Selects a drive signal to be connected to relay output RO6.
Const Bit pointer setting (see Terms and abbreviations on page 93 ). -
Pointer
14.70 RO7 src Selects a drive signal to be connected to relay output RO7.
Const Bit pointer setting (see Terms and abbreviations on page 93 ). -
Pointer
No. Name/Value Description FbEq
f
DIO3
(Hz)
14.64
14.65
14.62 14.63
14.62 14.63
14.64
14.65
Signal (real)
selected by
par.
14.61
f
DIO3
(Hz)
Signal (real)
selected by
par.
14.61