ABB ACS850-04 series, Firmware Manual

Page: 194 / 296

194 Parameters
35.16 Signal3 max Defines the real value of the selected signal that corresponds
to the maximum display value defined by parameter
35.20
Proc var3 max .
-32768…32768 Real signal value corresponding to maximum process
variable 3 value. 1 = 1
35.17 Signal3 min Defines the real value of the selected signal that corresponds
to the minimum display value defined by parameter
35.21
Proc var3 min . See diagram at parameter 35.16 Signal3 max .
-32768…32768 Real signal value corresponding to minimum process variable
3 value. 1 = 1
35.18 Proc var3 dispf Scaling for process variable 3. This setting also scales the
value for fieldbus.
0 1 = 1 0
1 10 = 1 1
2 100 = 1 2
3 1000 = 1 3
4 10000 = 1 4
5 100000 = 1 5
35.19 Proc var3 unit Specifies the unit for parameter 04.08 Process var3 (process
variable 3).
0…98 See parameter 35.05 Proc var1 unit . 1 = 1
35.20 Proc var3 max Maximum value for process variable 3. See diagram at
parameter
35.16 Signal3 max .
-32768…32768 Maximum value for process variable 3. 1 = 1
35.21 Proc var3 min Minimum value for process variable 3. See diagram at
parameter
35.16 Signal3 max .
-32768…32768 Minimum value for process variable 3. 1 = 1
36
36 Timed functions
Configuration of timers. See also section Timers on page 77 .
36.01 Timers enable Enable/disable control for timers. Whenever the source
selected by this parameter is off, timers are disabled; when
the source is on, timers are enabled.
DI1 Digital input DI1 (as indicated by 02.01 DI status , bit 0). 1073742337
DI2 Digital input DI2 (as indicated by 02.01 DI status , bit 1). 1073807873
No. Name/Value Description FbEq
35.17
35.20
35.21
35.16
04.08 Process var3
Signal selected by
35.15 Signal3 param