ABB ACQ810-04, Hardware Manual, Page: 80 / 144

80 Installation
Ground the motor cable shield at the motor end as follows:
•
360 degrees at the lead-through of the motor terminal box (1)
•
or by twisting the shield as follows: flattened width > 1/5 · length.
Mounting the drive module into the cabinet
WARNING! Follow the safety instructions, page 11 . Ignoring the
instructions can cause physical injury or death, or damage to the
equipment.
Handle the drive module carefully. Make sure that the module does not fall
down when moving it on the floor and during installation and maintenance
work: Open the support legs by pressing each leg a little down and turning
it aside (1, 2). When ever possible secure the module also with chains
from top.
Do not tilt the drive module (A). It is heavy (over 160 kg [350 lb]) and its
center of gravity is high. The module will overturn from a sideways tilt of
5 degrees. Do not leave the module unattended on a sloping floor.
1
a
b
b > 1/5 · a
1
2
3
A