ABB ACQ810-04, Hardware Manual, Page: 70 / 144

70 Installation
Checking the delivery
Check that all items listed under section Moving and unpacking the unit are present.
Check that there are no signs of damage. Before attempting installation and operation,
check the information on the type designation label of the drive to verify that the unit is of
the correct type.
Checking the insulation of the assembly

Drive
Do not make any voltage tolerance or insulation resistance tests on any part of the drive as
testing can damage the drive. Every drive has been tested for insulation between the main
circuit and the chassis at the factory. Also, there are voltage-limiting circuits inside the
drive which cut down the testing voltage automatically.

Input cable
Check the insulation of the input cable according to local regulations before connecting it
to the drive.
2
1
3
4
5
6
7
8
9
10
Input power cabling panel (option
+H381) package contents
1 Screw package
2 Paper fill
3 Input power cabling panel
4 Cardboard tray
5 Top cardboard cover
6 Support
7 Bands
8 Plastic bag
9 Rubber grommet
10 Grounding busbar to be
connected to the input power
cabling panel and the drive
module *)
*) If you cannot find the busbar in this
package, it can be found in the output
power cabling panel package.