AB Sciex QTRAP 4500 LC/MS/MS system, System User'S Manual, Page: 80 / 138

Operating Instructions — Analyze and Process Data
4500 Series of Instruments System User Guide
80 of 138 RUO-IDV-05-0264-A
Show ADC Data
ADC (analog-to-digital converter) data is acquired from a secondary detector (for example from a
UV detector through an ADC card), and is useful for comparison with mass spectrometer data. To
make ADC data available, acquire the data and the mass spectrometer data simultaneously and
save it in the same file.
1. Click Explore > Show > Show ADC Data .
The Select ADC Channel dialog opens.
2. In the Channel list, select a channel.
3. Click OK .
The ADC data opens in a new pane below the active pane.
Table 10-3 Right-Click Menu for the Chromatographic Peak List Tab
Menu Function
Analyst Classic
Parameters
Opens the Analyst Classic dialog.
IntelliQuan Parameters Opens the Intelliquan dialog.
Save As Text Saves the data as text file.
Delete Pane Deletes the pane.
Prerequisite Procedure
• Open Data Files on page 77 . Open a data file containing ADC data.
Tip! To see an example ADC data file, make sure that the Example project is
selected. Open the Devices folder, and then open the Adc16chan.wiff file.
Figure 10-2 Select ADC Channel Dialog