manualshive.com logo in svg

AB Sciex QTRAP 4500 LC/MS/MS system, System User'S Manual, Page: 11 / 138

Share
Download
AB Sciex QTRAP 4500 LC/MS/MS system System User'S Manual Download Page 11

Operational Precautions and Limitations

System User Guide

4500 Series of Instruments

RUO-IDV-05-0264-A

 11 of 138

International

•

Electromagnetic Compatibility

—IEC 61326-1, IEC CISPR 11 Class A

•

Safety

—IEC 61010-1, IEC 61010-2-061

For more information, refer to the Declaration of Conformity included with the system.

Electrical Precautions

AC Mains Supply

Caution: Potential System Damage: Do not unpack or connect any components. The 

Field Service Employee (FSE) will unpack, connect, and configure the system for the 

proper operating voltage.

For information on system electrical specifications, refer to the 

Site Planning Guide

.

Protective Earth Conductor

The mains supply must include a correctly installed protective earth conductor that must be 

installed or checked by a qualified electrician before connecting the mass spectrometer. The 

mass spectrometer must be positioned to permit access to the mains supply connector to 

disconnect the device.

Chemical Precautions

•

Determine which chemicals may have been used in the system prior to service and 

regular maintenance. Refer to Safety Data Sheets for the health and safety 

precautions that must be followed with chemicals.

•

Work in a well-ventilated area.

•

Always wear assigned personal protective equipment, including powder-free nitrile 

gloves, safety glasses and a laboratory coat.

•

Follow required electrical safe work practices.

•

Avoid ignition sources when working with flammable materials, such as isopropanol, 

methanol, and other flammable solvents.

WARNING! Electrical Shock Hazard: Use only qualified personnel for the 

installation of all electrical supplies and fixtures, and make sure that all 

installations adhere to local regulations.

WARNING! Electrical Shock Hazard: Do not intentionally interrupt the protective 

earth

 

conductor. Any interruption of the protective earth

 

conductor is likely to 

make the installation dangerous.

Summary of Contents for QTRAP 4500 LC/MS/MS system











































































































































Reviews:

No comments